Excess humidity is the biggest cause of mold due to the lack of proper aeration in the house. This culminates into a lot of moisture that eventually condenses thus leaving some water droplets on the varying surfaces in the house. This ultimately causes the rampant growth of mold. Many homes therefore offer the ideal conditions for mold to thrive. The control and subsequent removal of mold should be your priority whenever you spot either a tiny patch of mold or just a huge segment on either the walls or other locations in the house. This article looks at the top 5 tips of mold control.
- Avoid Drying Clothes Indoors
As mentioned above, condensation is one of the major causes of mold as it creates a very damp condition devoid of proper air circulation. Kitchens and bathrooms are therefore the leading candidates of mold growth. You should therefore avoid dry washing indoors as this causes a lot of condensation. It also prevents the heating system from functioning appropriately. This often manifests more in wet places or during winter when the growth of the mold tends to be more rampant. Dry washing should therefore be done outside or in a room with great ventilation. This similarly applies to a washing machine. It ought to be done in a room with proper ventilation to effectively curb the growth of the mold.
- Elimination of Clutter
You ought to be very keen and observant with regard to clutter. This is because it inhibits proper flow of air while also preventing the proper circulation in your HVAC system. In this instance, condensation often results from blockage caused by draperies or furniture and this leads to the creation of microclimates where mold grows and thrives. The remedy to all these is to ensure that the furniture is kept away from the ventilation in order to ensure that there is ample and unrestricted air circulation. You should also ensure that the fans are running constantly to prevent clogging hence making sure that the air is constantly moving.
- Fixing Plumbing Seepage and Leaks
This emanates from disintegrated pipes hence it is very vital to replace the old pipes which show some clear signs of dilapidation. The moisture resulting from these leaks has a tendency of travelling further than you could possibly anticipate. This necessitates some immediate remediation in order to ensure that the leaks are not neglected hence avoiding any calamitous consequences. This therefore helps to keep the mold in check since the leaks are properly fixed and the amount of moisture in your home is kept in check.
- Use of Mold Resistant Products
This entails the use of products such as drywalls, which are completely mold resistant, and paints that have mold inhibitors. The best kind of drywall is essentially paperless and its gypsum core entails some fiberglass as opposed to the plaster core that is present in the traditional drywalls. This fiberglass ensures that the surface is completely water resistant and this is vital in the areas which are predominantly wet such as the kitchen and the bathroom. The indicated type of drywall is not susceptible to mold as compared to the traditional drywall, which is very tough to clean and remove mold. The maintenance and replacement of this drywall is also more expensive than the mold resistant drywall that simply absorbs moisture hence preventing mold growth.
- Enhanced Airflow or Circulation in Your Home
This helps to regulate the temperature in your house by lowering it hence ensuring that there is less moisture in the air, floors and walls. The circulation can be further improved by ensuring that the furniture is distant from the walls and the linking doors between the rooms. This is crucial as it allows the fresh air to enter into the house hence preventing the mold from thriving by reducing the levels of moisture in the air.
The aforementioned tips are therefore very instrumental in the control and prevention of mold in your house. They aid to combat the mold before it thrives and spirals out of control. Every homeowner should therefore follow these tips in order to control the mold hence bringing the situation to a better resolve. It is also vital to be knowledgeable about your areas climate and the way it responds to moisture. This is because there is no uniform and universal mode of mold control hence being aware of what works best for your home based on the climate is paramount.